|
|
1 CPU
512M RAM
5GB SSD
1 IPv6 ONLY
500GB @1000Mbps (In & Out)
LXC Linux Containers
Hong Kong
10元 PUSH出 美元账户
tg@ jinws
#############################################################
安装官方 Warp 客户端和 proxychains4
apt update && apt install -y curl gnupg lsb-release proxychains4
curl -fsSL https://pkg.cloudflareclient.com/pubkey.gpg | gpg --yes --dearmor --output /usr/share/keyrings/cloudflare-warp-archive-keyring.gpg
echo "deb [arch=amd64 signed-by=/usr/share/keyrings/cloudflare-warp-archive-keyring.gpg] https://pkg.cloudflareclient.com/ $(lsb_release -cs) main" | tee /etc/apt/sources.list.d/cloudflare-client.list
apt update && apt install -y cloudflare-warp
注册设备和修改设置
warp-cli register # 看提示输入Y
warp-cli set-mode proxy
warp-cli set-proxy-port 11188 # 可以自己改本地监听端口
warp-cli connect
warp-cli enable-always-on
手！动！修！改！
nano /etc/proxychains4.conf
最后一行 socks4 开头的内容改成
socks5 127.0.0.1 1835 # 上面那个端口
测试
proxychains4 curl ip.sb
> 应该会输出 104.xx 的 cloudflare ip
使用
支持 socks5 代理的应用直接设置 sock5 代理，不支持的在命令前面加上 proxychains4**，v2ray系需要添加一个 socks5 outbound 作为出口
v2ray 系配置文件示例（XRAY也是一样）:
默认 V6 直连，V4 通过 warp 转发
{
"routing": {
"rules": [
{
"type": "field",
"ip": [ "0.0.0.0/0" ],
"outboundTag": "outbound-warp"
},
{
"type": "field",
"ip": [ "::/0" ],
"outboundTag": "direct"
}
]
},
"outbonds": [
{
"tag": "outbound-warp",
"protocol": "socks",
"settings": {
"servers": [
{
"address": "127.0.0.1",
"port": 1835
}
]
}
},
{
"tag": "direct",
"protocol": "freedom"
}
]
} |
|
