|
本帖最后由 zqxinran 于 2024-12-3 17:56 编辑
[ol]root@fiberstate:~# smartctl --all /dev/nvme0smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-27-amd64] (local build)Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org=== START OF INFORMATION SECTION ===Model Number: Samsung SSD 970 EVO Plus 1TBSerial Number: S59ANM0W522740YFirmware Version: 2B2QEXM7PCI Vendor/Subsystem ID: 0x144dIEEE OUI Identifier: 0x002538Total NVM Capacity: 1,000,204,886,016 [1.00 TB]Unallocated NVM Capacity: 0Controller ID: 4NVMe Version: 1.3Number of Namespaces: 1Namespace 1 Size/Capacity: 1,000,204,886,016 [1.00 TB]Namespace 1 Utilization: 19,412,267,008 [19.4 GB]Namespace 1 Formatted LBA Size: 512Namespace 1 IEEE EUI-64: 002538 553190f472Local Time is: Tue Dec 3 16:47:50 2024 HKTFirmware Updates (0x16): 3 Slots, no Reset requiredOptional Admin Commands (0x0017): Security Format Frmw_DL Self_TestOptional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat TimestmpLog Page Attributes (0x03): S/H_per_NS Cmd_Eff_LgMaximum Data Transfer Size: 512 PagesWarning Comp. Temp. Threshold: 85 CelsiusCritical Comp. Temp. Threshold: 85 CelsiusSupported Power StatesSt Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 7.80W - - 0 0 0 0 0 0 1 + 6.00W - - 1 1 1 1 0 0 2 + 3.40W - - 2 2 2 2 0 0 3 - 0.0700W - - 3 3 3 3 210 1200 4 - 0.0100W - - 4 4 4 4 2000 8000Supported LBA Sizes (NSID 0x1)Id Fmt Data Metadt Rel_Perf 0 + 512 0 0=== START OF SMART DATA SECTION ===SMART overall-health self-assessment test result: PASSEDSMART/Health Information (NVMe Log 0x02)Critical Warning: 0x00Temperature: 28 CelsiusAvailable Spare: 100%Available Spare Threshold: 10%Percentage Used: 1%Data Units Read: 15,535,364 [7.95 TB]Data Units Written: 31,881,392 [16.3 TB]Host Read Commands: 166,001,317Host Write Commands: 884,172,048Controller Busy Time: 3,535Power Cycles: 20Power On Hours: 5,978Unsafe Shutdowns: 13Media and Data Integrity Errors: 0Error Information Log Entries: 51Warning Comp. Temperature Time: 0Critical Comp. Temperature Time: 0Temperature Sensor 1: 28 CelsiusTemperature Sensor 2: 26 CelsiusError Information (NVMe Log 0x01, 16 of 64 entries)Num ErrCount SQId CmdId Status PELoc LBA NSID VS 0 51 0 0x5017 0x4004 - 0 0 -root@fiberstate:~# wget -qO- yabs.sh | bash# ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## Yet-Another-Bench-Script ## v2024-06-09 ## https://github.com/masonr/yet-another-bench-script ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## #Tue Dec 3 04:51:35 PM HKT 2024Basic System Information:---------------------------------Uptime : 0 days, 16 hours, 14 minutesProcessor : Intel(R) Xeon(R) CPU E3-1240 v5 @ 3.50GHzCPU cores : 8 @ 900.006 MHzAES-NI : ✔ EnabledVM-x/AMD-V : ✔ EnabledRAM : 31.2 GiBSwap : 0.0 KiBDisk : 915.8 GiBDistro : Debian GNU/Linux 12 (bookworm)Kernel : 6.1.0-27-amd64VM Type : NONEIPv4/IPv6 : ✔ Online / ✔ OnlineIPv6 Network Information:---------------------------------ISP : FiberState, LLCASN : AS26042 FiberState, LLCHost : FiberState, LLCLocation : Draper, Utah (UT)Country : United Statesfio Disk Speed Tests (Mixed R/W 50/50) (Partition /dev/nvme0n1p1):---------------------------------Block Size | 4k (IOPS) | 64k (IOPS) ------ | --- ---- | ---- ---- Read | 617.44 MB/s (154.3k) | 1.00 GB/s (15.6k)Write | 619.07 MB/s (154.7k) | 1.00 GB/s (15.7k)Total | 1.23 GB/s (309.1k) | 2.01 GB/s (31.4k) | | Block Size | 512k (IOPS) | 1m (IOPS) ------ | --- ---- | ---- ---- Read | 1.12 GB/s (2.1k) | 1.09 GB/s (1.0k)Write | 1.18 GB/s (2.3k) | 1.17 GB/s (1.1k)Total | 2.30 GB/s (4.5k) | 2.27 GB/s (2.2k)iperf3 Network Speed Tests (IPv4):---------------------------------Provider | Location (Link) | Send Speed | Recv Speed | Ping ----- | ----- | ---- | ---- | ---- Clouvider | London, UK (10G) | 851 Mbits/sec | 322 Mbits/sec | 116 ms Eranium | Amsterdam, NL (100G) | 854 Mbits/sec | 630 Mbits/sec | 121 ms Uztelecom | Tashkent, UZ (10G) | 731 Mbits/sec | busy | -- Leaseweb | Singapore, SG (10G) | 599 Mbits/sec | 483 Mbits/sec | 184 ms Clouvider | Los Angeles, CA, US (10G) | 934 Mbits/sec | 901 Mbits/sec | 13.9 ms Leaseweb | NYC, NY, US (10G) | 908 Mbits/sec | 623 Mbits/sec | 50.9 ms Edgoo | Sao Paulo, BR (1G) | 813 Mbits/sec | 144 Mbits/sec | 156 ms iperf3 Network Speed Tests (IPv6):---------------------------------Provider | Location (Link) | Send Speed | Recv Speed | Ping ----- | ----- | ---- | ---- | ---- Clouvider | London, UK (10G) | 836 Mbits/sec | 175 Mbits/sec | 116 ms Eranium | Amsterdam, NL (100G) | 842 Mbits/sec | 636 Mbits/sec | 121 ms Uztelecom | Tashkent, UZ (10G) | 644 Mbits/sec | 123 Mbits/sec | 221 ms Leaseweb | Singapore, SG (10G) | 771 Mbits/sec | 511 Mbits/sec | 184 ms Clouvider | Los Angeles, CA, US (10G) | 921 Mbits/sec | 899 Mbits/sec | 14.0 ms Leaseweb | NYC, NY, US (10G) | 897 Mbits/sec | 662 Mbits/sec | 46.0 ms Edgoo | Sao Paulo, BR (1G) | 800 Mbits/sec | 69.5 Mbits/sec | 156 ms Geekbench 6 Benchmark Test:---------------------------------Test | Value | Single Core | 1493 Multi Core | 4905 Full Test | https://browser.geekbench.com/v6/cpu/9216209YABS completed in 13 min 48 sec[/ol]复制代码
细节说明:
0、请再次阅读一次本帖标题。
今年黑五买多了。尤其是我买完这台后才发现FiberState有150刀月租的洛杉矶了,那我还用个屁的盐湖城。所以自刀回血用意。
1、这台机器的IPV4和IPV6(/64段)都国内可正常直连,关于网络情况详见:
https://bgp.tools/prefix/38.46.221.0/24
2、请自备FiberState账号,我不出账号。
3、为了节省字数,已删除测试脚本的无用文字。
我本帖没有提供的信息就是我不方便提供,我拒绝提供任何关于这台机器的其他信息。
4、月付,无合约,续费价34.95美元。
2024年12月30日到期。
千兆不限流。
5、如何计算交易金额:
抹掉交易日当天的基础上,剩余价值9折,美元兑人民币汇率算7。
6、转让流程:我和你都工单申请转出/转入这台机器,提交工单的链接:https://billing.fiberstate.com/submitticket.php
7、支付方式可以详谈,买家先款。
只要标题没有“[已出]”的前缀字样,表示这台机器还在。
如果你想购买这台机器,请你把你的联系方式通过站内私信的方式告诉我,而不是问我什么联系方式。
8、如果你私信我,默认你已接受上述所有文字提及的全部细节。
请注意:我已经在上文中详细说明了所有交易细节。尊重他人的最佳方式是仔细阅读我所写的每一个字,并确保完全理解。如果你忽视这点而表现出不尊重的行为,你将需要承担我不友善态度的后果。 |
|